http://www.ventingstore.com/faq en-us http://www.ventingstore.com/faq ActiveKB NX ralph@cinnabarequipment.com Sun, 20 May 2012 04:25:52 CDT 20 http://www.ventingstore.com/faq/questions.php?questionid=24 http://www.ventingstore.com/faq/questions.php?questionid=24 * The use of an additional condensate drain is required for the Bosch 250,635 and 2400 series. (PDF attachment below) Cinnabar Equipment stocks 3 options for this requirement, a Vertical In-Line, ... Cinnabar Equipment Sat, 08 Dec 2007 17:39:22 CST http://www.ventingstore.com/faq/questions.php?questionid=8 http://www.ventingstore.com/faq/questions.php?questionid=8 Here is the clearance to combustibles chart:Under the "Clearance Enclosed" section you will see an 8 inch clearance as the pipe passes thru a wall horizontally. This means that you need 8 inches c ... Cinnabar Equipment Tue, 12 Feb 2008 18:53:11 CST http://www.ventingstore.com/faq/questions.php?questionid=25 http://www.ventingstore.com/faq/questions.php?questionid=25 Cinnabar Equipment has put together several videos to give the installer information on how the Z-Vent parts are used and configured.Here are the links to the parts, just click on the link to vie ... Cinnabar Equipment Sun, 05 Jul 2009 12:35:58 CDT http://www.ventingstore.com/faq/questions.php?questionid=2 http://www.ventingstore.com/faq/questions.php?questionid=2 Any other type of vent pipe will not have an air tight gasketed connection and will corode in a short period of time. This will cause a deadly carbon monoxide leak and could cause a fire. B-Vent, ... Cinnabar Equipment Sat, 08 Dec 2007 18:16:30 CST http://www.ventingstore.com/faq/questions.php?questionid=7 http://www.ventingstore.com/faq/questions.php?questionid=7 If you have ordered from Cinnabar Equipment Co, an installation manual is included in each order.Also, an installation manual is available below under attachments in a .PDF format.As you are looki ... Cinnabar Equipment Sat, 27 Oct 2007 14:33:35 CDT http://www.ventingstore.com/faq/questions.php?questionid=40 http://www.ventingstore.com/faq/questions.php?questionid=40 *The Z-Vent 90 degree and 45 degree elbows are all non-adjustable,rigid elbows.* Inner Gasket on the female end, non-gasketed male * In many cases, a 90 degree elbow will have the value of 5 feet ... Cinnabar Equipment Wed, 10 Dec 2008 12:07:09 CST http://www.ventingstore.com/faq/questions.php?questionid=65 http://www.ventingstore.com/faq/questions.php?questionid=65 Z-Vent Part # 2SVBFDPA04 10 3/4 inches highAppliance Adapter,Condensate Drain and Backflow Prevention Built into one piece. Mounts ... Cinnabar Equipment Sat, 08 Dec 2007 18:17:50 CST http://www.ventingstore.com/faq/questions.php?questionid=43 http://www.ventingstore.com/faq/questions.php?questionid=43 Most Tankless manufacturers only require our Z-Vent AL29-4C single wall stainless steel.However, it's always best to check with your local building inspector because your local code may require do ... Cinnabar Equipment Sat, 08 Dec 2007 17:45:12 CST http://www.ventingstore.com/faq/questions.php?questionid=29 http://www.ventingstore.com/faq/questions.php?questionid=29 Listed below in a PDF is the venting requirements for the Paloma PTG42 and the PTG74.When ordering your vent pipe,consider including either the horizontal or vertical condensate drain as pictured. ... Cinnabar Equipment Sat, 27 Oct 2007 14:20:34 CDT http://www.ventingstore.com/faq/questions.php?questionid=19 http://www.ventingstore.com/faq/questions.php?questionid=19 Listed below is the contact information by category:Phone Orders only: 903-484-48088:30-3:30 ( central time) M-F* Product info,specs,dimensions, etc.can not be answered at the phone ... Cinnabar Equipment Wed, 08 Feb 2012 05:38:40 CST